No PRODUCTION will be started until we receive an EMAIL stating APPROVED!
Step 1 Preparation: Profile, repair cracks by using special menders and fillers, Diamond grind entire floor and vacuum.
Step 2 Coating the Floor (base coat): We mix and apply our base coat using ONLY 100% Premium Polyaspartic Coating (4x Stronger than Epoxy).
Step 3 Broadcasting the Color Flake: Once the base coat is applied, your choice of color flake is broadcast fully onto the floor giving it color and texture.
Step 4 Texture of the Floor: once the base coat is fully dried and cured, we scrape the floor to remove any loose or vertically standing flakes to create a smooth floor.
Step 5 Clear Coat Application: Our final step to the floor is applying ONLY 100% Premium Polyaspartic topcoat by using a squeegee working the product back and forth and then rolled to eliminate lines.
Enjoy your new Garage Floor!
At this point, we clean up and leave the new floor to dry. Approximately after 6-8 hours you can safely walk on your new floor. And after 24 hours, you can safely drive and park on your new coated floor.